Auto Tips

Getting to Know Car Pistons, Their Functions and Causes of Damage

29 May, 2023

6 minutes read

Image Getting to Know Car Pistons, Their Functions and Causes of Damage

The piston plays an important role in the combustion system, so its performance must be maintained. Damage to the car's piston components will have a fatal impact on the vehicle. For more details about the piston, from definition to maintenance tips, here's a full review.

What Is a Car Piston?

The car piston is a component that is located in the cylinder block area. This section is closely related to driving comfort and safety. The piston of this car has the main function as a receiver for combustion pressure.

After the combustion pressure is received, it will then be forwarded to the crankshaft. The forwarding process is carried out through the connecting rod. The role of the piston is also related to the combustion process, so that the car's engine power is supplied.

Function

1. Combustion Expansion Power Converter

The piston can function to convert combustion expansion energy into mechanical energy. When the spark plug fires, combustion will be created. Apart from that, an explosion in the form of heat, residual combustion gas, and expansion energy is also created.

This energy will not be maximized because it has not been converted to mechanical energy. Later, the piston will be pushed directly from the top to the bottom position to carry out this process.

2. Adjust Cylinder Volume

The workings of a car piston are its up and down motion. When these components go down, the volume in the cylinder increases. The engine will suck the fuel and air mixture into the fuel chamber.

3. Compressor of Cylinder Material

The next function of the piston is to compress the combustion material. This compressed material has been sucked in so that later it is flammable. This way of working is done when the compression step occurs.

Volume reduction will occur when the piston moves from below and upwards. The condition of the valve inside is also completely closed. The material in the cylinder is still there. Therefore, this process compresses the material in the cylinder.

Komponen Piston Mobil

Components

1. Piston Rings

The shape of the piston ring is like a bracelet with a gap to maintain the flexibility distance. The function of this section is to prevent leakage when compression occurs. In addition, oil and cylinders can also be prevented from entering the combustion chamber.

2. Piston Pen

The piston pen material is made of steel which has resistance to heavy and large objects. The piston pin is also often called the piston pin, connecting the small end of the component. In addition, the piston pin is also useful for hooking the piston rod, as well as transferring power from the piston to the rod.

3.Snap Rings

The location of the snap ring is on the piston pin which looks like a thin ring. This snap ring is used to lock the piston pin. The goal is not to get out easily which results in damage to the block wall.

4. Piston Rod

5. Piston Gap

This one component measures between 0.02 to 0.12 mm. Its function is to coordinate the upper diameter which incidentally is smaller in size than the lower diameter. The goal is that later the machine will not heat up easily, so that expansion is minimized.

6. Compression Rings

The compression rings are above and center of the piston. Its main function is as a barrier to the process of compressed air and fuel. As a result, leaks at the bottom will be optimally prevented.

7. Ring Oil

Ring oil is a piston component that has two kinds of springs. Its function is to prevent the entry of oil into the combustion chamber. In addition, the oil on the cylinder walls will also be cleaned when the piston moves.

How Does It Work?

The piston works to adjust the cylinder volume. When it is in the down position, the cylinder volume will increase. Air in this position will be sucked into the fuel chamber, and mixed with fuel oil.

If the position of the piston rises, the air volume will decrease. This position will also be useful for increasing the pressure and temperature of the fluid mixture. For more details, here are four important points on how car pistons work:

Sucking air into the cylinder section
Compressing combustion material
The results of this compression will be converted again into mechanical movement
The rest of the combustion gas is pushed so that it will come out later

Causes of Damaged/Problematic Car Pistons and How to Solve Them

1. Age of Use

Car pistons are not always in prime condition as they age. The longer it is aged, the quality loss is bound to occur. Damage will begin to be felt when usage reaches the age of 5 years. The solution is to service the vehicle regularly. This is useful for identifying earlier if this component has started to wear out.

2. Use of Low Octane Fuel

Octane is a unit that represents the amount of pressure, before the fuel runs out. This unit is also often referred to as the RON. Low RON fuel will cause piston damage. Indeed, in terms of price, low octane fuel will be cheaper. However, to treat car pistons, use high octane fuel. Besides being good for pistons, it's also good for treating other car components.

3. Use of Poor Quality Oil

Poor quality oil can worsen car components, including the pistons in them. Make sure the vehicle oil is in accordance with the type of car, and of maximum quality. In addition, change the oil regularly so as not to damage the pistons and other car components.

4. Clash of Pistons and Valves

The collision of these two components can occur if the piston you are using is not original. In addition, it could also be because it does not match the vehicle specifications. As a result, collisions occur, especially the previously good quality piston.

Car pistons are very vital to your vehicle and cannot escape service. Try to fix it immediately if you find that this one component feels worn out. In addition to making the vehicle safe and comfortable, it also does not cause damage to other components.